dmesg - first run
Linux version 4.9.66-1-MANJARO (builduser@manjaro) (gcc version 7.2.0 (GCC) ) #1 SMP PREEMPT Thu Nov 30 14:08:24 UTC 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000963ff] usable
BIOS-e820: [mem 0x0000000000096400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bffc283f] usable
BIOS-e820: [mem 0x00000000bffc2840-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Hewlett-Packard HP xw8600 Workstation/0A98h, BIOS 786F5 v01.46 09/20/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0440000000 mask 3FE0000000 uncachable
1 base 00C0000000 mask 3FC0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xbffc2 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe700-0x000fe70f] mapped at [ffff8800000fe700]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000090000] 90000 size 24576
BRK [0x01d59000, 0x01d59fff] PGTABLE
BRK [0x01d5a000, 0x01d5afff] PGTABLE
BRK [0x01d5b000, 0x01d5bfff] PGTABLE
BRK [0x01d5c000, 0x01d5cfff] PGTABLE
BRK [0x01d5d000, 0x01d5dfff] PGTABLE
BRK [0x01d5e000, 0x01d5efff] PGTABLE
RAMDISK: [mem 0x36fbd000-0x377d5fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000E9810 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000BFFC52EC 000064 (v01 HPQOEM SLIC-WKS 20120920 00000000)
ACPI: FACP 0x00000000BFFC5494 0000F4 (v03 HPQOEM SEABURG 00000001 00000000)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20160831/tbfadt-603)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20160831/tbfadt-603)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20160831/tbfadt-708)
ACPI: DSDT 0x00000000BFFC5A7A 0026A4 (v01 HPQOEM DSDT 00000001 MSFT 0100000E)
ACPI: FACS 0x00000000BFFC5200 000040
ACPI: FACS 0x00000000BFFC5200 000040
ACPI: SSDT 0x00000000BFFC811E 006DC0 (v01 HPQOEM PROJECT 00000001 MSFT 0100000E)
ACPI: APIC 0x00000000BFFC5588 0000D4 (v01 HPQOEM SEABURG 00000001 00000000)
ACPI: ASF! 0x00000000BFFC565C 00006A (v32 HPQOEM SEABURG 00000001 00000000)
ACPI: MCFG 0x00000000BFFC585E 00003C (v01 HPQOEM SEABURG 00000001 00000000)
ACPI: HPET 0x00000000BFFC5A10 000038 (v01 HPQOEM SEABURG 00000001 00000000)
ACPI: TCPA 0x00000000BFFC5A48 000032 (v01 HPQOEM SEABURG 00000001 00000000)
ACPI: DMAR 0x00000000BFFC56C6 000120 (v01 HPQOEM SEABURG 00000001 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
NODE_DATA(0) allocated [mem 0x43ffee000-0x43fff2fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000043fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000095fff]
node 0: [mem 0x0000000000100000-0x00000000bffc1fff]
node 0: [mem 0x0000000100000000-0x000000043fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000043fffffff]
On node 0 totalpages: 4194135
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3989 pages, LIFO batch:0
DMA32 zone: 12224 pages used for memmap
DMA32 zone: 782274 pages, LIFO batch:31
Normal zone: 53248 pages used for memmap
Normal zone: 3407872 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec89000, GSI 24-47
IOAPIC[2]: apic_id 3, version 32, address 0xfec88000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00096000-0x00096fff]
PM: Registered nosave memory: [mem 0x00097000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
PM: Registered nosave memory: [mem 0xbffc2000-0xbffc2fff]
PM: Registered nosave memory: [mem 0xbffc3000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff88043fc00000 s103448 r8192 d31720 u262144
pcpu-alloc: s103448 r8192 d31720 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4128578
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16425124K/16776540K available (6286K kernel code, 1079K rwdata, 1968K rodata, 1280K init, 1032K bss, 351416K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:1304 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3400.356 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6803.07 BogoMIPS (lpj=11334520)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160831
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 24K
ftrace: allocating 24880 entries in 98 pages
smpboot: Max logical packages: 2
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fe710000 flags: 0x0
DMAR: dmar0: reg_base_addr fe710000 ver 1:0 cap 900800c2f0462 ecap e01
DMAR: DRHD base: 0x000000fe712000 flags: 0x0
DMAR: dmar1: reg_base_addr fe712000 ver 1:0 cap 900800c2f0462 ecap e01
DMAR: DRHD base: 0x000000fe714000 flags: 0x0
DMAR: dmar2: reg_base_addr fe714000 ver 1:0 cap 900800c2f0462 ecap e01
DMAR: DRHD base: 0x000000fe719000 flags: 0x0
DMAR: dmar3: reg_base_addr fe719000 ver 1:0 cap 900800c2f0462 ecap e01
DMAR: DRHD base: 0x000000fe718000 flags: 0x1
DMAR: dmar4: reg_base_addr fe718000 ver 1:0 cap 900800c2f0462 ecap e01
DMAR: RMRR base: 0x000000bffd3000 end: 0x000000bffd3fff
DMAR: RMRR base: 0x000000bffd4000 end: 0x000000bffd4fff
DMAR: RMRR base: 0x000000bffd5000 end: 0x000000bffd5fff
DMAR: RMRR base: 0x000000bffd6000 end: 0x000000bffd6fff
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU X5492 @ 3.40GHz (family: 0x6, model: 0x17, stepping: 0xa)
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (54425.62 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 19:43:48, date: 12/11/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88042D2B7000 0008C4 (v01 HPQOEM CPU_TM2 00000001 MSFT 0100000E)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20160831/dsfield-211)
ACPI Error: Method parse/execution failed [\_SB.PCI0._OSC] (Node ffff88042f0a7ac8), AE_ALREADY_EXISTS (20160831/psparse-543)
acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:4003] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:4021] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:4023] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:4025] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [8086:4029] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:10.0: [8086:4030] type 00 class 0x060000
pci 0000:00:10.1: [8086:4030] type 00 class 0x060000
pci 0000:00:10.2: [8086:4030] type 00 class 0x060000
pci 0000:00:10.3: [8086:4030] type 00 class 0x060000
pci 0000:00:10.4: [8086:4030] type 00 class 0x060000
pci 0000:00:11.0: [8086:4031] type 00 class 0x060000
pci 0000:00:15.0: [8086:4035] type 00 class 0x060000
pci 0000:00:15.1: [8086:4035] type 00 class 0x060000
pci 0000:00:16.0: [8086:4036] type 00 class 0x060000
pci 0000:00:16.1: [8086:4036] type 00 class 0x060000
pci 0000:00:1b.0: [8086:269a] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd3400000-0xd3403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:2692] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x2000-0x201f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x2020-0x203f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x2040-0x205f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:268b] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0x2060-0x207f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xd3404000-0xd34043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2682] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0x20c0-0x20c7]
pci 0000:00:1f.2: reg 0x14: [io 0x20d0-0x20d3]
pci 0000:00:1f.2: reg 0x18: [io 0x20c8-0x20cf]
pci 0000:00:1f.2: reg 0x1c: [io 0x20d4-0x20d7]
pci 0000:00:1f.2: reg 0x20: [io 0x2080-0x209f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd3404400-0xd34047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:01.0: PCI bridge to [bus 80]
pci 0000:00:03.0: PCI bridge to [bus a0]
pci 0000:60:00.0: [10de:1c02] type 00 class 0x030000
pci 0000:60:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
pci 0000:60:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:60:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:60:00.0: reg 0x24: [io 0x1000-0x107f]
pci 0000:60:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:60:00.0: System wakeup disabled by ACPI
pci 0000:60:00.1: [10de:10f1] type 00 class 0x040300
pci 0000:60:00.1: reg 0x10: [mem 0xd3000000-0xd3003fff]
pci 0000:00:05.0: PCI bridge to [bus 60]
pci 0000:00:05.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:05.0: bridge window [mem 0xd2000000-0xd30fffff]
pci 0000:00:05.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:10:00.0: [8086:3500] type 01 class 0x060400
pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
pci 0000:10:00.3: [8086:350c] type 01 class 0x060400
pci 0000:10:00.3: PME# supported from D0 D3hot D3cold
pci 0000:10:00.3: System wakeup disabled by ACPI
pci 0000:10:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:09.0: PCI bridge to [bus 10-40]
pci 0000:00:09.0: bridge window [mem 0xd3500000-0xd36fffff]
pci 0000:1e:00.0: [8086:3510] type 01 class 0x060400
pci 0000:1e:00.0: PME# supported from D0 D3hot D3cold
pci 0000:1e:00.0: System wakeup disabled by ACPI
pci 0000:1e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:1e:01.0: [8086:3514] type 01 class 0x060400
pci 0000:1e:01.0: PME# supported from D0 D3hot D3cold
pci 0000:1e:01.0: System wakeup disabled by ACPI
pci 0000:1e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:10:00.0: PCI bridge to [bus 1e-40]
pci 0000:10:00.0: bridge window [mem 0xd3500000-0xd35fffff]
pci 0000:20:00.0: [1912:0015] type 00 class 0x0c0330
pci 0000:20:00.0: reg 0x10: [mem 0xd3500000-0xd3501fff 64bit]
pci 0000:20:00.0: PME# supported from D0 D3hot D3cold
pci 0000:20:00.0: System wakeup disabled by ACPI
pci 0000:1e:00.0: PCI bridge to [bus 20]
pci 0000:1e:00.0: bridge window [mem 0xd3500000-0xd35fffff]
pci 0000:1e:01.0: PCI bridge to [bus 40]
pci 0000:10:00.3: PCI bridge to [bus 11]
pci 0000:0e:00.0: [14e4:167b] type 00 class 0x020000
pci 0000:0e:00.0: reg 0x10: [mem 0xd3200000-0xd320ffff 64bit]
pci 0000:0e:00.0: PME# supported from D3hot D3cold
pci 0000:0e:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 0e]
pci 0000:00:1c.0: bridge window [mem 0xd3200000-0xd32fffff]
pci 0000:0f:00.0: [14e4:167b] type 00 class 0x020000
pci 0000:0f:00.0: reg 0x10: [mem 0xd3100000-0xd310ffff 64bit]
pci 0000:0f:00.0: PME# supported from D3hot D3cold
pci 0000:0f:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 0f]
pci 0000:00:1c.1: bridge window [mem 0xd3100000-0xd31fffff]
pci 0000:01:05.0: [104c:8023] type 00 class 0x0c0010
pci 0000:01:05.0: reg 0x10: [mem 0xd3304000-0xd33047ff]
pci 0000:01:05.0: reg 0x14: [mem 0xd3300000-0xd3303fff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd3300000-0xd33fffff]
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed003ff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
vgaarb: setting as boot device: PCI:0000:60:00.0
vgaarb: device added: PCI:0000:60:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:60:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00096400-0x0009ffff]
e820: reserve RAM buffer [mem 0xbffc2840-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (disabled)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x0400-0x041f] has been reserved
system 00:05: [io 0x0420-0x043f] has been reserved
system 00:05: [io 0x0440-0x045f] has been reserved
system 00:05: [io 0x0460-0x047f] has been reserved
system 00:05: [io 0x0480-0x048f] has been reserved
system 00:05: [io 0x0490-0x049f] has been reserved
system 00:05: [io 0xf800-0xf81f] has been reserved
system 00:05: [io 0xf820-0xf83f] has been reserved
system 00:05: [io 0xf840-0xf85f] has been reserved
system 00:05: [io 0xf860-0xf87f] has been reserved
system 00:05: [io 0xfa00-0xfa3f] has been reserved
system 00:05: [io 0xfc00-0xfc7f] has been reserved
system 00:05: [io 0xfc80-0xfcff] has been reserved
system 00:05: [io 0xfe00-0xfe7f] has been reserved
system 00:05: [io 0xfe80-0xfeff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xffe00000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:06: [mem 0xfe700000-0xfe7003ff] has been reserved
system 00:06: [mem 0xfe600000-0xfe6fffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x000c0000-0x000e7fff] could not be reserved
system 00:07: [mem 0x000e8000-0x000effff] could not be reserved
system 00:07: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:07: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:07: [mem 0xfeda0000-0xfedbffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 80]
pci 0000:00:03.0: PCI bridge to [bus a0]
pci 0000:60:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
pci 0000:00:05.0: PCI bridge to [bus 60]
pci 0000:00:05.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:05.0: bridge window [mem 0xd2000000-0xd30fffff]
pci 0000:00:05.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:1e:00.0: PCI bridge to [bus 20]
pci 0000:1e:00.0: bridge window [mem 0xd3500000-0xd35fffff]
pci 0000:1e:01.0: PCI bridge to [bus 40]
pci 0000:10:00.0: PCI bridge to [bus 1e-40]
pci 0000:10:00.0: bridge window [mem 0xd3500000-0xd35fffff]
pci 0000:10:00.3: PCI bridge to [bus 11]
pci 0000:00:09.0: PCI bridge to [bus 10-40]
pci 0000:00:09.0: bridge window [mem 0xd3500000-0xd36fffff]
pci 0000:00:1c.0: PCI bridge to [bus 0e]
pci 0000:00:1c.0: bridge window [mem 0xd3200000-0xd32fffff]
pci 0000:00:1c.1: PCI bridge to [bus 0f]
pci 0000:00:1c.1: bridge window [mem 0xd3100000-0xd31fffff]
pci 0000:00:1e.0: PCI bridge to [bus 01]
pci 0000:00:1e.0: bridge window [mem 0xd3300000-0xd33fffff]
pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 5 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: resource 6 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:00: resource 7 [mem 0xfed00000-0xfed003ff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: resource 9 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 10 [io 0x0d00-0xffff window]
pci_bus 0000:60: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:60: resource 1 [mem 0xd2000000-0xd30fffff]
pci_bus 0000:60: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:10: resource 1 [mem 0xd3500000-0xd36fffff]
pci_bus 0000:1e: resource 1 [mem 0xd3500000-0xd35fffff]
pci_bus 0000:20: resource 1 [mem 0xd3500000-0xd35fffff]
pci_bus 0000:0e: resource 1 [mem 0xd3200000-0xd32fffff]
pci_bus 0000:0f: resource 1 [mem 0xd3100000-0xd31fffff]
pci_bus 0000:01: resource 1 [mem 0xd3300000-0xd33fffff]
pci_bus 0000:01: resource 4 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:01: resource 5 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:01: resource 6 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:01: resource 7 [mem 0xfed00000-0xfed003ff window]
pci_bus 0000:01: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:01: resource 9 [io 0x0000-0x0cf7 window]
pci_bus 0000:01: resource 10 [io 0x0d00-0xffff window]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:60:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 8292K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbfc2000-0xbffc2000] (64MB) mapped at [ffff8800bbfc2000-ffff8800bffc1fff]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
BFQ I/O-scheduler: v8r12 (with cgroups support)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90002000000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: sig=0x1067a, pf=0x40, revision=0xa0b
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 13:563:748
rtc_cmos 00:00: setting system clock to 2017-12-11 19:43:48 UTC (1513021428)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1280K
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1888K
Freeing unused kernel memory: 80K
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
SCSI subsystem initialized
libata version 3.00 loaded.
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 16, io mem 0xd3404000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
xhci_hcd 0000:20:00.0: xHCI Host Controller
xhci_hcd 0000:20:00.0: new USB bus registered, assigned bus number 2
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002020
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 22, io base 0x00002060
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m1024@0xd3404400 port 0xd3404500 irq 19
ata2: SATA max UDMA/133 abar m1024@0xd3404400 port 0xd3404580 irq 19
ata3: SATA max UDMA/133 abar m1024@0xd3404400 port 0xd3404600 irq 19
ata4: SATA max UDMA/133 abar m1024@0xd3404400 port 0xd3404680 irq 19
ata5: SATA max UDMA/133 abar m1024@0xd3404400 port 0xd3404700 irq 19
ata6: SATA max UDMA/133 abar m1024@0xd3404400 port 0xd3404780 irq 19
firewire_ohci 0000:01:05.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
xhci_hcd 0000:20:00.0: hcc params 0x014050cf hci version 0x100 quirks 0x00000090
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:20:00.0: xHCI Host Controller
xhci_hcd 0000:20:00.0: new USB bus registered, assigned bus number 7
usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata4.00: ATAPI: PHILIPS SPD2514T, P1.2, max UDMA/100
ata1.00: supports DRM functions and may not be fully accessible
ata4.00: configured for UDMA/100
ata1.00: disabling queued TRIM support
ata1.00: ATA-9: Samsung SSD 850 EVO 2TB, EMT02B6Q, max UDMA/133
ata1.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
scsi 3:0:0:0: CD-ROM PHILIPS SPD2514T P1.2 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
usb 7-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-1: new low-speed USB device number 2 using uhci_hcd
hub 7-1:1.0: USB hub found
hub 7-1:1.0: 4 ports detected
firewire_core 0000:01:05.0: created device fw0: GUID 0060b000002a6055, S400
usb 2-1: new high-speed USB device number 2 using xhci_hcd
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/0003:1A2C:2C27.0001/input/input2
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
hid-generic 0003:1A2C:2C27.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:1d.1-1/input0
input: USB USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.1/0003:1A2C:2C27.0002/input/input3
hid-generic 0003:1A2C:2C27.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keyboard] on usb-0000:00:1d.1-1/input1
tsc: Refined TSC clocksource calibration: 3400.120 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3102bfee5e6, max_idle_ns: 440795222020 ns
usb 2-1.1: new low-speed USB device number 3 using xhci_hcd
usb 6-1: new low-speed USB device number 2 using uhci_hcd
usb 2-1.2: new full-speed USB device number 4 using xhci_hcd
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.3/usb6/6-1/6-1:1.0/0003:046D:C016.0003/input/input4
hid-generic 0003:046D:C016.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.3-1/input0
usb 2-1.4: new full-speed USB device number 5 using xhci_hcd
clocksource: Switched to clocksource tsc
floppy0: no floppy controllers found
random: fast init done
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
cgroup: cgroup2: unknown option "nsdelegate"
systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:33 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
systemd[1]: Proceeding WITHOUT firewalling in effect!
systemd[1]: File /usr/lib/systemd/system/systemd-udevd.service:32 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
systemd[1]: Proceeding WITHOUT firewalling in effect!
systemd[1]: File /usr/lib/systemd/system/systemd-logind.service:34 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
systemd[1]: Proceeding WITHOUT firewalling in effect!
systemd[1]: Reached target Remote File Systems.
EXT4-fs (sda3): re-mounted. Opts: discard
systemd-journald[232]: Received request to flush runtime journal from PID 1
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia-nvlink: Nvlink Core is being initialized, major device number 246
vgaarb: device changed decodes: PCI:0000:60:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 384.98 Thu Oct 26 15:16:01 PDT 2017 (using threaded interrupts)
[drm] Initialized
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to module i5400_edac.c controller I5400: DEV 0000:00:10.0 (POLLED)
EDAC PCI0: Giving out device to module i5400_edac controller EDAC PCI controller: DEV 0000:00:10.0 (POLLED)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 384.98 Thu Oct 26 14:41:13 PDT 2017
[drm] [nvidia-drm] [GPU ID 0x00006000] Loading driver
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
ACPI: Power Button [PBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
wmi: Mapper loaded
intel_rng: Firmware space is locked read-only. If you can't or
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
input: PC Speaker as /devices/platform/pcspkr/input/input7
tg3.c:v3.137 (May 11, 2014)
snd_hda_intel 0000:60:00.1: Disabling MSI
snd_hda_intel 0000:60:00.1: Handle vga_switcheroo audio client
tg3 0000:0e:00.0 eth0: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:24:81:0e:61:0a
tg3 0000:0e:00.0 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:0e:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:0e:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
snd_hda_codec_realtek hdaudioC0D0: ALC262: SKU not ready 0x411111f0
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x16/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
snd_hda_codec_realtek hdaudioC0D0: CD=0x1c
snd_hda_codec_realtek hdaudioC0D0: Aux=0x14
ACPI Warning: SystemIO range 0x000000000000F828-0x000000000000F82F conflicts with OpRegion 0x000000000000F800-0x000000000000F84F (\_SB.PCI0.LPC.PMIO) (20160831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
tg3 0000:0f:00.0 eth1: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:24:81:0e:61:09
tg3 0000:0f:00.0 eth1: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:0f:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:0f:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
intel_powerclamp: No package C-state available
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
tg3 0000:0e:00.0 enp14s0: renamed from eth0
iTCO_vendor_support: vendor-support=0
gpio_ich: ACPI BAR is unavailable, GPI 0 - 15 unavailable
gpio_ich: GPIO from 462 to 511 on gpio_ich
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0xf860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: HP WMI hotkeys as /devices/virtual/input/input15
tg3 0000:0f:00.0 enp15s0: renamed from eth1
IPv6: ADDRCONF(NETDEV_UP): enp14s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp14s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp15s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp15s0: link is not ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:05.0/0000:60:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:05.0/0000:60:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:05.0/0000:60:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:05.0/0000:60:00.1/sound/card1/input19
mousedev: PS/2 mouse device common for all mice
NVRM: Your system is not currently configured to drive a VGA console
nvidia-modeset: Allocated GPU:0 (GPU-d8354b70-b66b-eeb3-06c5-bba9233957b7) @ PCI:0000:60:00.0
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver ti_usb_3410_5052
ti_usb_3410_5052 2-1.4:1.0: TI USB 3410 1 port adapter converter detected
ti_usb_3410_5052: probe of 2-1.4:1.0 failed with error -5
usbcore: registered new interface driver snd-usb-audio
ti_usb_3410_5052 2-1.4:2.0: TI USB 3410 1 port adapter converter detected
usb 2-1.4: TI USB 3410 1 port adapter converter now attached to ttyUSB0
fuse init (API version 7.26)
floppy0: no floppy controllers found
usb 2-1.4: ti_interrupt_callback - hardware error, 254
tg3 0000:0e:00.0 enp14s0: Link is up at 1000 Mbps, full duplex
tg3 0000:0e:00.0 enp14s0: Flow control is on for TX and on for RX
IPv6: ADDRCONF(NETDEV_CHANGE): enp14s0: link becomes ready
tg3 0000:0f:00.0 enp15s0: Link is up at 1000 Mbps, full duplex
tg3 0000:0f:00.0 enp15s0: Flow control is on for TX and on for RX
IPv6: ADDRCONF(NETDEV_CHANGE): enp15s0: link becomes ready
random: crng init done
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 241